PLiXiR THE STATEMENT with Furutech FI-31
THE STATEMENT uses thick, ultra-pure copper conductors, a symmetrical conductor construction and an FI-E11 Copper connector.
The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.
A balanced mains power conditioner for mid-sized high-end audio systems, with an XQ transformer built by Noratel, 1500 W maximum power and 1000 W continuous power. The European version has five Schuko outlets for your audio equipment.
If desired, combine the conditioner with a PLiXiR THE STATEMENT mains cable with an IEC C19 connector. For those striving for the very best result within their installation, the PLiXiR Supreme Balanced AC Power Cable is the optional top choice within the cable range.
The PLiXiR Elite BAC 1500 MK II is a fully symmetrical, balanced AC power conditioner. It belongs to the second generation of Elite BAC conditioners and combines an updated Noratel transformer with a stiffer aluminium enclosure and vibration mitigation measures.
With 1500 W maximum and 1000 W continuous power, this model is intended for a mid-sized hi-fi installation. Think of an integrated amplifier or a pre- and power amplifier combination, supplemented with a DAC, streamer and other sources. Whether your entire installation is suitable depends on the power consumption of all connected devices.
A balanced mains power conditioner uses a transformer with a symmetrical output. The two power conductors are at equal, opposite voltages relative to ground. PLiXiR uses this principle to reduce noise via the mains power supply and the grounding of connected equipment.
The idea of symmetry is comparable to that of a balanced signal connection, but the application and electrical operation are not identical. In the Elite BAC MK II, the transformer windings are more precisely matched to each other. This improves noise suppression and lowers the natural noise floor. In addition, one experiences more dynamics and a more natural rendering of details.
The fully symmetrical transformer is built by Noratel according to PLiXiR specifications. XQ stands for Extra Quiet and refers to Noratel's proprietary magnetic core material.
According to PLiXiR, this material offers the lowest hum and vibration of the cores they have tested, along with strong isolation against direct current components in the mains network.
The MK II design has more precisely matched transformer windings and integrated external magnetic shielding. That shielding is intended to reduce magnetic leakage flux and improve the damping of the transformer. The design goal is a lower noise floor and a purer rendering.
The enclosure consists of thick, precisely extruded and CNC-machined aluminium parts. The design has fewer connections than the original Elite BAC enclosure. An 8 mm aluminium base plate forms the solid foundation of the device.
The Elite BAC MK II series uses custom-made Bfly Audio Pure isolation feet from Germany. The multi-layer composite construction is intended to limit vibrations from the device itself and the environment. The internal wiring consists of OFC copper wire designed by PLiXiR.
Each device is built by hand. Where possible, electrical connections are soldered directly, with as few intermediate connectors as possible. The founder and chief designer James Soh performs the final quality control and sonic tuning.
Complete your installation with a mains cable from PLiXiR's own range. THE STATEMENT and Supreme use a balanced cable architecture and are offered for high-end audio applications. The Supreme is the flagship of the cable range.
THE STATEMENT uses thick, ultra-pure copper conductors, a symmetrical conductor construction and an FI-E11 Copper connector.
The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.
For those who want to use PLiXiR's highest cable series, the Supreme Balanced AC Power Cable is the optional top choice. According to PLiXiR, this cable represents the most advanced development of their proprietary balanced AC cable architecture.
The Supreme uses UPOCC copper conductors and high-quality Furutech Fl-46 NCF Copper. The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.
With these mains cables, 'balanced' refers to the cable construction. The cable itself does not create a symmetrical power supply: that happens in the transformer of the BAC power conditioner.
| Type | True Balanced AC power conditioner |
|---|---|
| Transformer | Noratel, XQ core, external magnetic shielding |
| Maximum power | 1500 W |
| Continuous power | 1000 W |
| Outlets | 5 × Schuko in the European Schuko version |
| Power input | IEC C20 |
| Mains cable device connector | IEC C19 |
| Optional mains cable | PLiXiR THE STATEMENT with Furutech FI-31, Schuko–IEC C19 |
| Optional top-class mains cable | PLiXiR Supreme Balanced AC Power Cable with Furutech Fl-46 NCF; Schuko–IEC C19 |
| Input voltage | 220–240 V AC in the European version |
| Output voltage | 220–240 V AC, balanced, 50 Hz |
| Dimensions | 34.5 × 30 × 14.5 cm, including feet |
| Weight | 26 kg |
| Enclosure | Black anodized aluminium, 8 mm base plate |
| Feet | Custom-made Bfly Audio Pure isolation feet |
| Internal wiring | PLiXiR OFC copper |
| No-load consumption | Less than 1.5% of the maximum power, according to the product specifications |
| Warranty | 2 years |
For stereo power amplifiers at 4 ohms, the following guidelines are stated. These values are expressed as audio output power per channel.
| Amplifier class | Guideline per channel at 4 ohms |
|---|---|
| Class A | 80 W |
| Class AB | 250 W |
| Class D | 400 W |
These values are selection guidelines. The total mains power consumption of the amplifier and the other devices must together remain within the available 1000 W continuous. Therefore, do not confuse the audio output power of an amplifier with its power consumption.
Unsure? Send us the brand and model of your amplifier and the other connected equipment, and we will assess which BAC model is suitable for your installation.
| Feature | BAC 1500 MK II | BAC 2000 MK II | BAC 3000 MK II |
|---|---|---|---|
| Positioning | Mid-sized systems | Mid-sized to large systems | Highest power capacity of these three |
| Maximum power | 1500 W | 2000 W | 3000 W |
| Continuous power | 1000 W | 1400 W | 2000 W |
| Weight | 26 kg | 34 kg | 45 kg |
The five Schuko outlets share the capacity of the conditioner: 1500 W maximum and 1000 W continuous. The classifications below are examples and not an approval for every combination.
| System | Outlet 1 | Outlet 2 | Outlet 3 | Outlet 4 | Outlet 5 |
|---|---|---|---|---|---|
| Integrated amplifier | Amplifier | DAC | Streamer | CD player | Turntable power supply or spare |
| Pre- and power amplifier | Power amplifier | Pre-amplifier | DAC | Streamer | Phono pre-amplifier or spare |
| Two monoblocks | Monoblock left | Monoblock right | Pre-amplifier | DAC | Streamer |
Especially with two monoblocks, the total power consumption must be checked. The guidelines for stereo power amplifiers do not automatically apply to each monoblock individually.
A balanced power conditioner uses a symmetrical transformer to provide connected equipment with balanced mains voltage. At PLiXiR, this design is intended to reduce noise via the mains power supply and the grounding.
XQ stands for Extra Quiet. It refers to Noratel's proprietary magnetic core material, which PLiXiR uses because of the low hum and vibration.
The BAC 1500 MK II delivers 1500 W maximum and 1000 W continuous. That power applies to all connected devices together, not per outlet.
The published guidelines for stereo power amplifiers at 4 ohms are 80 W per channel for class A, 250 W per channel for class AB and 400 W per channel for class D.
In addition, check the total mains power consumption of the amplifier and the other equipment. These guidelines are not a replacement for an assessment of the entire installation.
The BAC 1500 MK II has an IEC C20 power input. For this, you use a mains cable with an IEC C19 device connector.
Choose PLiXiR THE STATEMENT with Schuko mains plug and Furutech FI-31 device connector. The FI-31 is the IEC C19 version and fits the C20 input. Explicitly state “Schuko–IEC C19 / Furutech FI-31” when ordering.
The PLiXiR Supreme Balanced AC Power Cable is the flagship of PLiXiR's mains cable range and thus the optional top choice within this cable range.
THE STATEMENT uses ultra-pure copper conductors and is offered with various Furutech connectors. The Supreme is higher in the range and uses UPOCC copper conductors, with a further developed balanced cable architecture according to PLiXiR.
THE STATEMENT is offered with various Furutech connectors. For the C20 input of the BAC 1500 MK II, the FI-31 version is relevant, because it has an IEC C19 connector. Therefore, also order the correct connector type.
No. With these cables, 'balanced' refers to the cable architecture. The symmetrical power supply is created by the transformer in the BAC power conditioner.
In this product description, both cables are optional additions.
The European Schuko version has five outlets.
Distribute your equipment across the five outlets and check the total power consumption. All outlets share the available 1000 W continuous together.
One possible combination is an integrated amplifier, DAC, streamer, cd player and turntable power supply. With two monoblocks, it must first be checked whether the entire installation falls within the capacity.
No. Amplifiers, pre-amplifiers, DACs, cd players, turntables and media servers are mentioned as applications. Which combination is suitable depends on the power consumption and the number of required connections.
The BAC 1500 MK II delivers 1500 W maximum and 1000 W continuous. The BAC 2000 MK II delivers 2000 W maximum and 1400 W continuous and thus offers more capacity for a power-hungry installation.
The BAC 3000 MK II offers 3000 W maximum and 2000 W continuous. It is the larger option when the total load of your installation requires more capacity than the BAC 1500 MK II or BAC 2000 MK II can offer.