Plixir Elite BAC 3000 (AMP) MK II Audio Power Conditioner

Plixir Elite BAC 3000 (AMP) MK II Audio Power Conditioner

€6.299,00
Skip to product information
Plixir Elite BAC 3000 (AMP) MK II Audio Power Conditioner

Plixir Elite BAC 3000 (AMP) MK II Audio Power Conditioner

€6.299,00

PLiXiR Elite BAC 3000 AMP MK II – dedicated power conditioner for powerful amplifiers

The PLiXiR Elite BAC 3000 AMP MK II is the dual-output version of the Elite BAC 3000 MK II, developed for a specific application: balanced power conditioning for powerful amplifiers. With a maximum power of 3000 W and two outputs, it provides a dedicated power supply for suitable power amplifiers or monoblocks.

The AMP version is also designed for use as a pre-conditioner before an existing power distributor. This allows you to choose a balanced conditioner for your amplifier section, or for additional conditioning before a suitable distributor.

3000 W Maximum power
2 outputs Dedicated connection
AMP For powerful amplifiers
Pre-conditioner Before a suitable distributor

Why choose the PLiXiR Elite BAC 3000 AMP MK II?

A comprehensive high-end installation does not need to be connected entirely to a single conditioner. The BAC 3000 AMP MK II allows for a targeted division: a conditioner for the powerful amplifier section and a separate solution for sources and preamplifiers.

This application aligns with the design of the AMP version. Instead of seven connections for a complete installation, it has two outputs for a specific task. The available capacity does not therefore increase per device; the combined load remains the determining factor.

  • Dedicated balanced power conditioning for powerful amplifiers.
  • Two outputs for a suitable stereo power amplifier or combination of monoblocks.
  • Option to distribute sources and amplifiers across separate conditioners.
  • Use as a pre-conditioner before a suitable power distributor.
  • 3000 W maximum power for the connected equipment combined.

Two applications: amplifier conditioner and pre-conditioner

Dedicated power supply for power amplifiers

The first application is balanced power conditioning exclusively for powerful amplifiers. Sources, DAC, and preamplifiers can be connected to a separate Elite BAC MK II.

This gives you a clear division within the installation: the amplifier section gets its own conditioner, while the other components are powered separately. This is a layout choice, not a guarantee of an audible improvement.

Pre-conditioner before an existing power distributor

The second application is use before a power distributor from another brand. The connection sequence is: wall socket → BAC 3000 AMP MK II → power distributor → connected equipment.

According to the product description, the AMP in this application provides removal of direct current components from the mains supply and suppression of ground-related noise. 

What does balanced power conditioning do?

The BAC 3000 AMP MK II uses a balanced power output. The two power conductors are at equal, opposite voltages relative to ground.

The design is aimed at reducing power supply and ground-related interference in connected audio equipment. It is not an amplifier: the AMP does not increase the audio output power of your power stage.

What can you expect from the sound result?

The reason for using a conditioner is to condition the power supply, not to add a specific sound character. In a comparison in your own installation, you can assess whether the application makes a relevant difference.

  • Background silence: do soft details remain recognizable without the presentation becoming restless?
  • Dynamics: do subtle nuances and powerful passages remain convincingly distinct from each other?
  • Bass reproduction: are basslines easy to follow and individual low tones clearly defined?
  • Spatial presentation: do voices and instruments retain a recognizable place within the recording?
  • Cohesion: do detail and sound balance remain part of a single musical performance?

For dedicated high-power audio equipment

The BAC 3000 AMP MK II is intended for a targeted application with powerful audio amplifiers. Think of a stereo power amplifier or two monoblocks, provided their combined power consumption and switching behavior fit the conditioner.

The audio output power is not the same as the mains power consumption. Also, the power consumption at rest, the load during use, and the inrush current are relevant for the assessment.

The two outputs do not each deliver 3000 W. The power rating applies to the conditioner as a whole. 

Build quality for a fixed high-end installation

The BAC 3000 AMP MK II has a black anodized, sandblasted aluminum enclosure. The stated dimensions are 42.5 × 38 × 14.5 cm, including feet. The published weight is 49 kg.

This means the device requires a stable place in your audio cabinet or installation. Check the load-bearing capacity of the surface before placement and ensure that the cabling can be connected to the connectors without tension.

The AMP version is a separate version of the standard BAC 3000 MK II.

How do you use the two outputs?

Application Output 1 Output 2 Other equipment
Stereo power amplifier Power amplifier Spare Sources and preamplifier on a separate conditioner
Two monoblocks Monoblock left Monoblock right Sources and preamplifier on a separate conditioner
Pre-conditioner Suitable power distributor Spare Equipment behind the distributor counts towards the total load

Optional mains cables: PLiXiR THE STATEMENT and Supreme

Complete your installation with a suitable mains cable from PLiXiR's own range. THE STATEMENT is the high-quality cable option; the Supreme Balanced AC Power Cable is the flagship of the cable line. Both cables are optional additions.

Optional mains cable

PLiXiR THE STATEMENT with Furutech FI-31

THE STATEMENT uses thick, ultra-pure copper conductors, a symmetrical conductor construction, and a FI-E11 Copper connector.

The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.

Optional top choice

PLiXiR Supreme Balanced AC Power Cable

For those who want to use the highest cable series from PLiXiR, the Supreme Balanced AC Power Cable is the optional top choice. According to PLiXiR, this cable represents the most advanced development of the company's own balanced AC cable architecture.

The Supreme uses UPOCC copper conductors and high-quality Furutech Fl-46 NCF Copper. The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.

What does 'balanced' mean for a mains cable?

For these mains cables, 'balanced' refers to the cable construction. The cable itself does not create a symmetrical supply voltage: that happens in the conditioner.

Technical specifications

Specification PLiXiR Elite BAC 3000 AMP MK II
Type Balanced AC power conditioner / pre-conditioner
Version Two-output version of the standard BAC 3000 MK II
Primary application Dedicated power conditioning for powerful amplifiers
Second application Pre-conditioner before a suitable power distributor
Maximum power 3000 W for the connected equipment combined
Continuous power Confirm separate AMP specification with the supplier
Number of outputs 2 for both the European and American versions
European socket version Confirm desired Schuko version when ordering
European input voltage 220–240 V AC
European output voltage 220–240 V AC, balanced, 50 Hz
American voltage variant 100–120 V AC in and out, balanced, 60 Hz
Published amplifier guideline Class AB stereo power amplifier: 600 W per channel at 4 ohms
Dimensions 42.5 × 38 × 14.5 cm, including feet
Weight 49 kg
Enclosure Black anodized, sandblasted aluminum
No-load consumption Less than 1.5% of the maximum power
Power supply input Confirm exact type of the supplied version
Device cable connector IEC C19 with an IEC C20 power supply input
Optional mains cable PLiXiR THE STATEMENT; FI-31 / IEC C19 for a suitable power supply input
Optional top-class mains cable PLiXiR Supreme Balanced AC Power Cable with Furutech Fl-46 NCF; Schuko–IEC C19 version
Delivery of optional mains cables Only included when explicitly stated in the offered bundle
Warranty 2 years

BAC 3000 MK II or BAC 3000 AMP MK II?

Feature BAC 3000 MK II BAC 3000 AMP MK II
Application Comprehensive audio installation Dedicated amplifier section or pre-conditioner
European outputs 7 for the Schuko version 2
Maximum power 3000 W 3000 W
Continuous capacity 2000 W 2000 W
Connection strategy Amplifiers and sources on one conditioner Condition amplifiers separately or pre-condition a suitable distributor

Choose the standard BAC 3000 MK II when you want to connect multiple devices directly to one conditioner. Choose the AMP version when you deliberately want to use a separate conditioner for the amplifier section, or pre-condition a suitable existing power distributor.

Fewer outputs do not automatically mean more power per device or a better sound result. The choice is about application and system layout.

Frequently asked questions

What is the BAC 3000 AMP MK II intended for?

For two applications: dedicated balanced power conditioning for powerful amplifiers and use as a pre-conditioner before a suitable power distributor.

How many outputs does the AMP version have?

The AMP version has two Schuko outputs.

Does each output deliver 3000 W?

No. The 3000 W maximum rating applies to the conditioner as a whole. The load of all connected equipment must be added together.

Can I connect two monoblocks?

This is only possible with a suitable combination. Check the combined power consumption and the inrush current of both amplifiers. The audio output power is not the same as the mains power consumption.

What amplifier guideline is stated?

The product information mentions a Class AB stereo power amplifier with 600 W per channel at 4 ohms. This is a guideline, not a general approval for every amplifier with that specification.

Where do I connect the DAC, streamer, and preamplifier?

In the dedicated amplifier application, you connect the other equipment to a separate conditioner. The AMP then remains intended for the amplifier section or you use a power distributor.

Can I connect a power distributor behind the AMP?

Yes, use as a pre-conditioner before another power distributor is a described application of the AMP version. Have the specific combination assessed beforehand.

The distributor does not add capacity. All devices behind it count towards the total load.

What does pre-conditioner mean?

A conditioner that is placed before another power distributor. The distributor then receives its power via the AMP and distributes it to the connected equipment.

Does the AMP give my amplifier more audio power?

No. The AMP is a power conditioner, not an audio amplifier. The name refers to the intended application with amplifiers, not to an increase in their stated output power.

Which mains cable fits the BAC 3000 AMP MK II?

With an IEC C20 input, you need an IEC C19 device connector. For THE STATEMENT, the Furutech FI-31 version is relevant for this.

Which cable do I choose for the highest PLiXiR cable series?

The Supreme Balanced AC Power Cable is the flagship of PLiXiR’s mains cable range. 

Do the mains cables themselves create balanced mains voltage?

No. For the cables, 'balanced' refers to the cable architecture. The balanced power output is provided by the conditioner.

Is a Statement or Supreme mains cable included?

In this product description, both cables are optional. 

When do I choose the standard BAC 3000 MK II?

Choose the standard version when you want to connect multiple amplifiers and sources directly to one conditioner. The European standard version has seven outputs. The AMP version has two outputs for a targeted application.

Advice for your amplifier section

Would you like to know if the BAC 3000 AMP MK II is compatible with your power amplifier or monoblocks? Send us the make and model of the amplifiers and, if used as a preamplifier, the power distributor and a complete equipment list. We will assess the application, required capacity, and suitable power cable based on your installation.

You may also like