PLiXiR THE STATEMENT with Furutech FI-31
THE STATEMENT uses thick, ultra-pure copper conductors, a symmetrical conductor construction, and a FI-E11 Copper connector.
The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.
The PLiXiR Elite BAC 3000 AMP MK II is the dual-output version of the Elite BAC 3000 MK II, developed for a specific application: balanced power conditioning for powerful amplifiers. With a maximum power of 3000 W and two outputs, it provides a dedicated power supply for suitable power amplifiers or monoblocks.
The AMP version is also designed for use as a pre-conditioner before an existing power distributor. This allows you to choose a balanced conditioner for your amplifier section, or for additional conditioning before a suitable distributor.
A comprehensive high-end installation does not need to be connected entirely to a single conditioner. The BAC 3000 AMP MK II allows for a targeted division: a conditioner for the powerful amplifier section and a separate solution for sources and preamplifiers.
This application aligns with the design of the AMP version. Instead of seven connections for a complete installation, it has two outputs for a specific task. The available capacity does not therefore increase per device; the combined load remains the determining factor.
The first application is balanced power conditioning exclusively for powerful amplifiers. Sources, DAC, and preamplifiers can be connected to a separate Elite BAC MK II.
This gives you a clear division within the installation: the amplifier section gets its own conditioner, while the other components are powered separately. This is a layout choice, not a guarantee of an audible improvement.
The second application is use before a power distributor from another brand. The connection sequence is: wall socket → BAC 3000 AMP MK II → power distributor → connected equipment.
According to the product description, the AMP in this application provides removal of direct current components from the mains supply and suppression of ground-related noise.
The BAC 3000 AMP MK II uses a balanced power output. The two power conductors are at equal, opposite voltages relative to ground.
The design is aimed at reducing power supply and ground-related interference in connected audio equipment. It is not an amplifier: the AMP does not increase the audio output power of your power stage.
The reason for using a conditioner is to condition the power supply, not to add a specific sound character. In a comparison in your own installation, you can assess whether the application makes a relevant difference.
The BAC 3000 AMP MK II is intended for a targeted application with powerful audio amplifiers. Think of a stereo power amplifier or two monoblocks, provided their combined power consumption and switching behavior fit the conditioner.
The audio output power is not the same as the mains power consumption. Also, the power consumption at rest, the load during use, and the inrush current are relevant for the assessment.
The two outputs do not each deliver 3000 W. The power rating applies to the conditioner as a whole.
The BAC 3000 AMP MK II has a black anodized, sandblasted aluminum enclosure. The stated dimensions are 42.5 × 38 × 14.5 cm, including feet. The published weight is 49 kg.
This means the device requires a stable place in your audio cabinet or installation. Check the load-bearing capacity of the surface before placement and ensure that the cabling can be connected to the connectors without tension.
The AMP version is a separate version of the standard BAC 3000 MK II.
| Application | Output 1 | Output 2 | Other equipment |
|---|---|---|---|
| Stereo power amplifier | Power amplifier | Spare | Sources and preamplifier on a separate conditioner |
| Two monoblocks | Monoblock left | Monoblock right | Sources and preamplifier on a separate conditioner |
| Pre-conditioner | Suitable power distributor | Spare | Equipment behind the distributor counts towards the total load |
Complete your installation with a suitable mains cable from PLiXiR's own range. THE STATEMENT is the high-quality cable option; the Supreme Balanced AC Power Cable is the flagship of the cable line. Both cables are optional additions.
THE STATEMENT uses thick, ultra-pure copper conductors, a symmetrical conductor construction, and a FI-E11 Copper connector.
The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.
For those who want to use the highest cable series from PLiXiR, the Supreme Balanced AC Power Cable is the optional top choice. According to PLiXiR, this cable represents the most advanced development of the company's own balanced AC cable architecture.
The Supreme uses UPOCC copper conductors and high-quality Furutech Fl-46 NCF Copper. The FI-31 is an IEC C19 connector and fits the IEC C20 input of the conditioner.
For these mains cables, 'balanced' refers to the cable construction. The cable itself does not create a symmetrical supply voltage: that happens in the conditioner.
| Specification | PLiXiR Elite BAC 3000 AMP MK II |
|---|---|
| Type | Balanced AC power conditioner / pre-conditioner |
| Version | Two-output version of the standard BAC 3000 MK II |
| Primary application | Dedicated power conditioning for powerful amplifiers |
| Second application | Pre-conditioner before a suitable power distributor |
| Maximum power | 3000 W for the connected equipment combined |
| Continuous power | Confirm separate AMP specification with the supplier |
| Number of outputs | 2 for both the European and American versions |
| European socket version | Confirm desired Schuko version when ordering |
| European input voltage | 220–240 V AC |
| European output voltage | 220–240 V AC, balanced, 50 Hz |
| American voltage variant | 100–120 V AC in and out, balanced, 60 Hz |
| Published amplifier guideline | Class AB stereo power amplifier: 600 W per channel at 4 ohms |
| Dimensions | 42.5 × 38 × 14.5 cm, including feet |
| Weight | 49 kg |
| Enclosure | Black anodized, sandblasted aluminum |
| No-load consumption | Less than 1.5% of the maximum power |
| Power supply input | Confirm exact type of the supplied version |
| Device cable connector | IEC C19 with an IEC C20 power supply input |
| Optional mains cable | PLiXiR THE STATEMENT; FI-31 / IEC C19 for a suitable power supply input |
| Optional top-class mains cable | PLiXiR Supreme Balanced AC Power Cable with Furutech Fl-46 NCF; Schuko–IEC C19 version |
| Delivery of optional mains cables | Only included when explicitly stated in the offered bundle |
| Warranty | 2 years |
| Feature | BAC 3000 MK II | BAC 3000 AMP MK II |
|---|---|---|
| Application | Comprehensive audio installation | Dedicated amplifier section or pre-conditioner |
| European outputs | 7 for the Schuko version | 2 |
| Maximum power | 3000 W | 3000 W |
| Continuous capacity | 2000 W | 2000 W |
| Connection strategy | Amplifiers and sources on one conditioner | Condition amplifiers separately or pre-condition a suitable distributor |
Choose the standard BAC 3000 MK II when you want to connect multiple devices directly to one conditioner. Choose the AMP version when you deliberately want to use a separate conditioner for the amplifier section, or pre-condition a suitable existing power distributor.
Fewer outputs do not automatically mean more power per device or a better sound result. The choice is about application and system layout.
For two applications: dedicated balanced power conditioning for powerful amplifiers and use as a pre-conditioner before a suitable power distributor.
The AMP version has two Schuko outputs.
No. The 3000 W maximum rating applies to the conditioner as a whole. The load of all connected equipment must be added together.
This is only possible with a suitable combination. Check the combined power consumption and the inrush current of both amplifiers. The audio output power is not the same as the mains power consumption.
The product information mentions a Class AB stereo power amplifier with 600 W per channel at 4 ohms. This is a guideline, not a general approval for every amplifier with that specification.
In the dedicated amplifier application, you connect the other equipment to a separate conditioner. The AMP then remains intended for the amplifier section or you use a power distributor.
Yes, use as a pre-conditioner before another power distributor is a described application of the AMP version. Have the specific combination assessed beforehand.
The distributor does not add capacity. All devices behind it count towards the total load.
A conditioner that is placed before another power distributor. The distributor then receives its power via the AMP and distributes it to the connected equipment.
No. The AMP is a power conditioner, not an audio amplifier. The name refers to the intended application with amplifiers, not to an increase in their stated output power.
With an IEC C20 input, you need an IEC C19 device connector. For THE STATEMENT, the Furutech FI-31 version is relevant for this.
The Supreme Balanced AC Power Cable is the flagship of PLiXiR’s mains cable range.
No. For the cables, 'balanced' refers to the cable architecture. The balanced power output is provided by the conditioner.
In this product description, both cables are optional.
Choose the standard version when you want to connect multiple amplifiers and sources directly to one conditioner. The European standard version has seven outputs. The AMP version has two outputs for a targeted application.
Would you like to know if the BAC 3000 AMP MK II is compatible with your power amplifier or monoblocks? Send us the make and model of the amplifiers and, if used as a preamplifier, the power distributor and a complete equipment list. We will assess the application, required capacity, and suitable power cable based on your installation.